The high-speed continuous roll bag machine manufacturers share with you the detailed process flow of the bag making mechanism bag as follows:

(1) Loading rack

An air cylinder controls the iron rod to slide up and down for easy loading. The reel was screwed to death. After loading, use a low pressure wide bag to bundle the film. The roll rotates counterclockwise.

(2) Tailstock rubber roller

The two rubber rollers are pressed tightly and driven by a small motor to rotate the film.

(3) roller shutter

Roller shutters are generally made of mats or plastics, which mainly play a role of pressing and tension control. There is an inductor behind the cursor to detect the presence of a film in front of it to control the operation and stop of the tailstock roller motor. Stop if there is no action.

(4) Pause board

Made of stainless steel, it functions as a flat film to prevent bag wrinkling and ensure bag size. Therefore, the pause board should be level. Light weight items can be placed on top of the film to flatten the film.

(5) Light Eye

Control the length of the bag, the cutting position, and the length of the color scale by tracking the changes in the color scale of the printed color on the bag. The light eye can be moved forward and backward by adjusting the screws at both ends, and the light eye can be stopped and corrected (2-3mm). A piece of white paper can be placed under the film directly facing the light eye to increase its sensitivity. If the pattern is complicated, you can also pad white paper on the pattern to ensure that the pattern under the light eye is straight, and there are no other colors in front and back, and the pattern interferes.

Selection of light eyes: ①Straighter straight line. ② There is no other pattern interference in front of the pattern, otherwise it will affect the stop of light eyes.

(6) Sealing

The sealing knife is triangular, with a set of rollers at each end to ensure that the film runs straight at the sealing knife. Knife rollers are generally heat-resistant silicone rollers. There is a layer of heat-resistant tape on the knife and on the silicone roller. There are two copper tiles on the two ends of the sealing knife, which control the upper and lower sides of the sealing knife.

Change the cloth: ①Seal the sealing knife with sandpaper first.

② Stick the knife cloth in the middle of the knife and drive towards both sides to avoid air bubbles and wrinkles in the middle of the knife cloth, otherwise it will cause a false seal.

(7) Adjustment bar

The height of the iron bar is controlled by adjusting the screw, and then the position of the film cutting is adjusted.

(8) Corrugated rubber roller

There is a spring to prevent the film from being wound on the roller caused by static electricity, and a special motor controls its operation. There are special anti-static devices before sealing the knife and after cutting the knife (an iron rod with a row of iron pins on it)

(9) Cutting knife

There are two upper and lower cutters, the lower cutter is fixed, the blade is inclined upward by about 5 °, and the upper cutter is used to cut the film. The cutters are mostly cast iron, and the ends of the cutters are lubricated. The upper and lower knife fixing screws can be adjusted to control the forward and backward distance when it contacts the lower knife.

(10) Folded

Folding is divided into three steps, and the bag making machine automatically folds. If the customer requires that the characters face outward when packing, the roll is rotated clockwise when it is rolled up. If the character is facing in, the roll is rotated counterclockwise when it is rolled up.