T-shirt bag making machine manufacturers share with you which parts of the cutting system of the bag making machine
The cutting system of the bag making machine is composed of a cutter, a length adjuster, an overrunning clutch, and a welding wire adjustment.
1. Cutting knife: It is the most important part of the system. It is a floating mechanism that adopts moving knife and sliding guide, and is compressed by spring. The upper and lower knifes can be adjusted. An adjusting screw is provided to adjust the tightness of the cutter, which can well eliminate the difficult to cut raw materials.
2. Bag-making length adjuster: The bag-making length is adjusted by changing the position of the connecting rod sleeve on the eccentric carriage to control the bag-making length. The bag-making size is adjusted by tightening the handwheel and the nut.
3. Overrunning clutch: Zhongsu overrunning clutch is an important part of this machine. Its quality and performance directly affect the error of product length. However, due to the high working frequency during use, its life span is also limited. If it is found that there is an error in the length of the bag during the production process (usually after half a year of continuous production), and other problems cannot be solved, the clutch can be disassembled for inspection and maintenance.
4. Adjustment of the distance between welding line and cutting line: The distance between welding line and cutting line is generally 5-10mm. Turn the hand wheel on the adjustment frame to make the beam roller rise or fall a certain distance to get the ideal cutting line. In order to easily observe the quality of the welding wire, the position of the welding wire of the single bottom wire can be adjusted to the outer end of the cutter of the machine. If the welding line and the bottom line are not parallel, loosen the fixing screw of one bevel gear, turn the handwheel to raise or lower one end of the beam roller; after the production is stable, lock the gear screw.
5. Welding knife adjustment method: Place a piece of thin paper on the support seat, and turn the large handwheel in the body box by hand to make the welding knife.
6. Automatic light control feeding device: This device is composed of servo motor, feeding rubber roller, light control masker, curtain, photoelectric tracking machine and electric control line. Its function is to keep normal film feeding during the production process. When the machine is running, when the film feeding speed is too fast and the light-controlled rays are blocked, the device will issue a command to stop the motor from feeding.
- Hot cutting machine manufacturers tell you the purpose and characteristics of heat sealing and cutting bag making machine
- Common faults of automatic continuous roll bag making machine
- Sealing and cutting machine manufacturers tell you maintenance and troubleshooting of sealing and cutting machine
- Features of Automatic Rolling Bag Making Machine
- Convenient bag making machine manufacturers tell you the servo control of bag making system
- Market bag making machine manufacturers tell you the daily operation problems and countermeasures of bag making machine
- Sealing and cutting machine manufacturers tell you the definition and characteristics of sealing and cutting machine
- Sealing and cutting machine manufacturers share the sealing and cutting process of sealing and cutting machinery with you
- Yinsheng Electric wishes everyone a happy Dragon Boat Festival
- Visitors to the Yinsheng Electric booth were bursting at the fair
- Sealing and cutting machine manufacturers tell you the abnormal situation and treatment of slitting machine